Forest Rebuilding

For the majority of the work, the tractor is driven in the direction of the front. There are some works that, by changing the direction, not only will get more from the tractor, but also will improve the working position of the driver. This is why Valtra has designed and developed the unique movement in both directions of travel TwinTrac available for tractors with power between 99 and 370 hp.

 Use of TwinTrac conceived by the Valtra lead to increased productivity in a wide range of applications in agriculture, forestry, animal husbandry work on a farm or in the maintenance of roads. The operator benefits from:

- A very good visibility and better control of equipment attached;

- Improve agility tractor;

- Improved ergonomics, which means reducing the risk of occupational diseases (muscle pain, stiff neck, etc..).

Therefore, work performed and more accurate and faster tractor driver savings of time and fuel!

TwinTrac system requires additional orders placed behind the cabin, including a second wheel and shift lever for front / rear plus the accelerator pedal, clutch and brakes. The driver's seat of Valtra tractors rotates 180 degrees, so it is very simple change direction without leaving the seat.

A recent study shows that the work carried out behind the tractor resulting in health benefits for the operator, since the position of the neck is twisted back and minimal.

Bellima KR model was developed from 125/130, which in the past has proved many times



Round baler baler press Bellima fixed camera can be operated by a small power tractor. With low maintenance costs, achieved very strong bales of hay and straw.

Like many other balers Krone round baler and Bellima is made with the new lift pick-up Easy-Flow. Previous model pick-up control cam and the other wearing parts have become unnecessary.

No cam technology has several obvious advantages. From experience so far, wear parts can be reduced by up to 60 percent. Overall, the new system EasyFlow is 30 percent faster than the old version controlled by cam.

Bellima can be ordered with two types of pick-ups. F125 Bellima width is 1.400 mm (DIN11220) with hydraulic control and can be set to desired height. The design reduced the distance between pick-up and chamber pressure, thus amplifying uniform transfer of material, optimizing power and maintaining uniform flow. EasyFlow version 1.800 mm extra wide base comes as Bellima model F130.

Bellima Fortima is not only in appearance but also by internal technical design. For example, working with the same technology lift bar - chain, which has already demonstrated its value. At this, due to the effect of driving with the gear, no power loss, turning the more intense. Suitable as a material for baling completely dry or wet.

A distinct advantage of Bellima is that no mail. Binding to both the purse strings and can be turned on hydraulic and conveniently from the tractor cab. Post and rope are placed in front of the media, where there is room for six coils of rope or two rolls of mesh.

Always, when it comes to self-propelled sprayer, we're thinking of moving large equipment difficult road due to the large size and low visibility, and that is why many farmers and agricultural service providers were reluctant to purchase.

Challenger wanted to come to market with a car that would contradict all these disadvantages, but without compromising their specific productivity. Thus, considering first the views of farmers and legislation, we can say that we are at the stage where we can offer a practical solution farms - propelled sprayer RoGator Challenger 600B!


With a transport width of only 2.55 m, you can forget costly transport permits, moving from one field to another is no longer an obstacle for your business. Moreover, thanks to the cab, visibility is quite good regardless of how we're working in the field or road transport position.


Cabin has received attention both in the choice of materials and ergonomics. It was intended primarily driver comfort as well as simple to implement orders, despite the complexity of the machine. It can be seen that most orders are armrest control, including primary monitor, greatly easing the driver's job. Benefits from air suspension seat and armrest is part of the seat, facilitating its use.

GPS guidance - when working with speeds up to 30 km / h and the length of 36 m, surely we need an efficient system for automatic tracking satellite. The system has a separate monitor, so you can take advantage of guidance, while the armrest machine monitor provides vital information about how the machine works.

The chassis is made of one piece and the distribution of weight during operation is 50% -50% front and back, thus ensuring the most efficient movement of the machine.


AGCO Power engine with power to 242 hp, provides an extremely low which may decrease in most cases less than 1 liter / ha. Its location is optimal, in the right mid chassis is accessible from ground level for any intervention.


Basin starts from 4000 liters and up to 6000 liters depending on the model. On his casting was used latest technology, providing a highly fine without corners, which facilitates run-fully.


Steering is easy to use, the being on all four wheels, making it headland turns to be perfect, just trampling footsteps rear wheels on the front wheel, thereby reducing the impact on crops.


Track mechanically or hydraulically adjustable and can be set between 1.8 m and 2.25 m, which allow you to herbicides in different sole without too much effort.

Suspension;? Move smoothly on uneven ground at high speeds could say that for agricultural equipment can not be taken into account. However, this type of machine is equipped with independent suspension on each wheel hydro-pneumatic, making it speeds forward to a superior trailed sprayers or worn.

Sprayer ramps, cars Challenger RG600B range, are among the few on the market that offers standard working arms made entirely of aluminum. They are linked via a central framework machine equipped with shock absorbers that provide stability class for precise spraying. The suspension arms is innovative in that it is both symmetric and asymmetric, eliminating vertical and horizontal movements for a more uniform and efficient as spraying. In addition, the ramps are equipped with sensors for copying land, which facilitates maintenance throughout a range of herbicides work best, although differences found are quite high level.

Comprising all the best



With four new 500 series Vario, Fendt create a new class of vehicles in the segment represented by compact tractors. These tractors are equipped with many features that until now only found in top tractors. Innovations and amenities a 500 series Vario tractor gives its unbeatable competitive advantage in power class from 125 to 165 hp.

The new Fendt Efficient Technology representative persuade the latest technology engine, the unique cab VisioPlus and Variotronic device, and many other large series characteristics that are found now and a new series 500 Vario tractor.

Meeting of the art

New series 500 Vario, including models 512 Vario, 513 Vario, 514 Vario and 516 Vario, covering power range from 125 to 165 hp. They are equipped with Deutz engine, four-cylinder, with a capacity of 4.04 l and injection common rail, the top model of the range, Fendt 516 Vario, reaching a maximum power of 165 bhp at 1800 rpm. Tractors are equipped with SCR technology with AdBlue, for compliance with exhaust emission standard Euro Stage 3b (= Tier IV interim). This technology already exists in larger series - 700, 800 and 900 - has proved its efficiency in terms of fuel savings PowerMix tests. With a consumption of 240 g / kWh, Fendt 936 Vario achieved the best result ever achieved PowerMix DLG test.

Since AdBlue urea solution treatment occurs after the combustion process and external recirculation of exhaust gases is not required, the engine is optimally adjusted, thereby achieving maximum power efficiency. Thus, Varios 500 series engines combine high performance with exceptionally low fuel consumption, which make these Fendt tractors other new representatives Efficient Technology.

Vario transmission ML 90, which has proven over time undeniable qualities, ensures highly efficient powertrain. Stepless transmission contributes to significant savings of time and money. Tractor Management System TMS (Tractor Management System) maintain an optimal economical vehicle operation. Operators only need to enter the desired speed and activate TMS and it will take control of engine and transmission. All this means efficient, fully automated.

New to the Vario 500 series is automatic control system of engine. This allows adjustment depending on the load speed, in turn dependent on engine speed.


New cabin VisioPlus - unlimited visibility

New Fendt cab VisioPlus known to the Vario 700 series tractors, ensures maximum comfort and exceptional visibility. Windscreen curves continued until the hood, allowing for full front loader high. More space and nearly six square meters of glass gives the car an excellent feeling of spaciousness. Ergonomics, smart operation interface and implementation of the highest quality interior components contribute to a substantial increase comfort status. All operating system functions were placed optimally in Varioterminal and right armrest that moves with the driver's seat. The interior impresses with its exceptional quality of execution. Fendt specific, well designed controls are placed in a logical and Vario device is easy to handle.

Perfect comfort

As part of the new Varioterminal, now and Variotronic, GPS guidance system VarioGuide, shooting functions, system documentation and ISOBUS VarioDoc the attached equipment have found their place in this power class. Thanks VarioGuide is possible to work for longer periods of time, day or night, and the driver of the tractor can turn his attention fully on the machine attached. Precision while driving is possible even in conditions of poor visibility. Vario 500 Series ideal benefit of automatic features necessary to perform specific work step by step. Advanced hydraulic system allows a huge range of works attached equipment specific to this class of power. Armrest on the right is the core operating system. The new 500 Vario series, even during turning maneuvers is not necessary to change the actuators, because operators can comfortably support arm on the armrest and order the tractor and attached equipment via the multifunction joystick Varioterminal community.
With VarioGuide is possible to reduce overlaps with an average of 6%, which means at the same time, a decrease of 6% in fuel consumption and agricultural raw materials needed, such as seeds, fertilizers etc. Moreover, with the help of documentary VarioDoc all relevant information and data can be recorded with the least effort in the shortest possible time, and can then be stored and analyzed.


Smart Technology on both sides

Fendt 500 Vario has more connections than any other tractor in its class for power: five dual electrohydraulic actuator plugs at the back and two in front, power beyond, connecting ISOBUS and more. In total, Fendt 500 Vario is equipped with over 22 fittings, located both in front of and behind the tractor, making him a high degree of adaptability to various types of work and working smoothly connecting the equipment attached.

Vario 500 series compact tractors are fast and easy to handle when used for transport work. Maximum speed of 50 km / h at a low speed motor allows fast movement and, more importantly, economic, public roads.
Self-regulating suspension of front axle, steering Fendt Reaction, shock absorbers, suspension cab suspension seat and steering column lock automatically provides both exceptional feel while driving and overall ergonomics.
Due to its high performance and compact design, Fendt 500 Vario provides flexibility and good handling operations at any of the work done on a farm. High performance Fendt 500 Vario Series combined with compact design and maneuverability make it suitable for a wide range of applications. Thus, whether it is used for agriculture, field or farm, either for construction or forestry, Fendt 500 Vario will always have exactly the right equipment.

Vario 500 series is ideal for front loader Fendt Cargo works. Thanks to the new type of windshield angle view top tripled, with operators now have a complete view of front loader high. Also, the front window Fendt 500 Vario's can ever be fully open during front loader work done. Fendt Cargo can be easily controlled with cross handle, existing standard.

From legendary Fendt Favorit 500

Fendt 500 series legendary reputation stems from the early years of his 90s. The most popular model among farmers was the flagship of the series, Fendt Favorit 500 Vario 515 C. The new series has grown from what it meant and is now a symbol of efficiency, reliability and low fuel consumption with high performance. Fendt 500 Vario series is available depending on the equipment, the 500 Vario ProfiPlus variants, 500 and 500 Vario Vario Profi Power (standard tractor factory configured without the possibility of retrofitting).

Fendt 500 Vario Fendt 500 Vario Profi ProfiPlus and will be available from the end of the year, and model 500 Vario Power in January 2013.

Category: MT Series 800C

• 6-cylinder turbocharged CAT, capacity 18.1 liters - Rated power 425 kW / 570 hp / 454 kW maximum power / 609 hp

• hydraulic pump 223 l / min., portable cold start

• CAT Powershift gearbox 40 km / h, 16 speeds forward and 4 speeds back

• Fuel tank capacity of 1250 liters

• without PTO

• without tie back

• 4 sockets double hydraulic, pneumatic brake

• cabin next generation "C" pneumatic seat and armrest supensie multi-functional

• climatic air conditioning and heating system, work lights and transport

• color monitor with embedded control system (TMC)

• informant board, adjustable steering wheel

• drawbar categ. IV, flashing lamp

• rolling system with track "Extreme Agriculture" 30 "- 762 mm

• Type of suitcase weights 28 to 57 kg each plus mounting support, in total 1.936 kg

• Track type suitcase weights 32 to 57 kg each, a total of 1.824 kilograms

The new generation JCB Fastrac aims to change the way agriculture is done. Customers need to achieve higher productivity and better performance, led to the development of new generation of JCB Fastrac tractors



Begin production in 1991 Fastrac tractor series 100, in 1995 the series 1100 with speeds up to 50 km / h, series 2000 series replaced in 1998 and 3000, in 2001 the entire range of tractors is equipped as standard with ABS; 2005 is the year Release Series tractors from 8000 to 8250 with an engine of 8.3 liter Cummins V-Tronic transmission, the 2006 engines from Cummins are present in 3200 and 3230 6.7 liter engine, 2155 and 2170 are launched in 2007, 2008 Series Release year 7000 - some of the best tractors on the market.

JCB Fastrac is the only tractor full suspension front / rear. Hence not only a comfort for operators and for equipment, but improved thrust without adding additional weight. Equal distribution of weight between the axles, reduce ground compaction and allows the development of the thrust.

Any vehicle capable of reaching speeds needs to be stopped in a safe maximum, is where JCB tractors, so all models are equipped with disc brakes. ABS offers unparalleled control in all conditions.

Fastrac 8250 features a color display with touch screen function, which gives the operator complete control of the tractor functions. Additional joystick buttons can be programmed via touch screen to meet user requirements. Touch screen allows selection of the operation according to the operation performed.



JCB Fastrac 8250 tractor performance

• torque of 1100 Nm at 65% of engine power gives huge tractor pulling power.

• full suspension system maximizes traction power, offering great stability.

• The bar offers maximum strength under all conditions.

• Distribute weight ratio of about 50/50 tires optimizes all four sides, reducing ground compaction and providing unmatched pulling power.

• The hydraulic pump has a flow up to 210 l / min and ensures optimal flow to enhance the performance of the equipment they work with.



Productivity

V-Tronic transmission provides optimal speed for each application. The joystick is programmable function groups to reduce operator fatigue to a minimum.

Control is easy and allows the operator to quickly obtain desired results, exploiting maximum tractor functions. 600 liters tank significantly increases the time between feeds for the tractor will not stay longer on the road than in the field.

Optionally, can be delivered with integrated front PTO operated by control panel for unparalleled precision.



Cabin

Color display with easy to understand icons, touch screen technology. Operator's seat is equipped with a cushion of air and can opt for heated seats. Console control arm chair offers comfort and a farmer. The cabin has panoramic views and a second passenger seat.

Optionally, the tractor cab can be equipped with heated windshield and mirrors in order to provide the best possible visibility, no matter how harsh the weather is working.



Maintenance costs

V-Tronic transmission automatically reduces engine speed to 1,800 rpm at 65 km / hour. Flexibility transmission reduces engine speed while speed remains constant. Oil pump oil pump only when needed, making power and fuel economy.

Intervals between revisions are 500 hours to 1000 hours engine and transmission, thus reducing maintenance costs.



INNOVATIONS

• only tractor in the world with full suspension front / rear;
• first tractor color touch screen;
• only tractor which can reach speeds up to 80 km / h, has continuously variable transmission (CVT) without speed: fuel consumption is reduced, allowing the engine to always operate efficiently;
• ABS braking system for maximum security is a necessity due to high speeds that can develop JCB Fastrac tractor.

British weekly Farmers Weekly has to work seven tractors of 100 hp to find strengths and weaknesses of each.

Thus, Case-IH CS 105 Pro: 101 HP (Make: St. Valentin, Austria), Deutz-Fahr Agrofarm 430: 109 hp (Treviglio, Italy), Fendt 310 Vario: 100 hp (Marktoberdorf, Germany), John Deere 5100R : 101 hp (Mannheim, Germany), Massey Ferguson 5445: 95 hp (Beauvais, France), New Holland: 106 hp (Jesi, Italy) and Valtra N92: 101 hp (Suolahti, Finland) were tested to work - plowing, harrowing, towing and loading, with the most famous European Institute of tractors DLG test, which measured engine power, torque, fuel consumption and noise power lifting.

At the request of the organizers, builders have sent all tractors equipped with one charger choice but to evaluate performance while operating tractors, not the charger. She missed the competition Claas, the manufacturer failed to send Axos model with Perkins engine tests and the new Arion 400 was not yet available.

To assess the real capabilities of the seven tractors were tested also cabins, seeking spaciousness, visibility and use of storage space inside the cabin were compared gearboxes on ease of handling, smoothness and responsiveness and number of steps and were checked thoroughly all orders. Finally, tested the brakes and ease of maintenance.

Results

Net winner was Fendt 310 Vario, which came first performance tests, functionality, comfort and consumption, but also ... price (the difference between the cheapest and the most expensive of the tractors tested was 27,000 euros) 4-cylinder Deutz engine which drives the moving average deployed over the other, while transmission was designated "could not be better for class. "

Case-IH CS 105 Pro received the highest score for ergonomics, quality construction and overall performance and good scores on all tests were obtained and JD 5100R and MF 5445.

So if you want a powerful tractor with good performance and are willing to spend a little more fuel, MF 5445 is a very attractive choice. If the main criterion is value for money, Deutz-Fahr and New Holland are undisputed competitors, and if you're looking for a good strong tractor at all, it is worth to consider the Valtra N92 model.

Powerfarm new DT 100 was designed to comply with new pollution standards Tier 3 turbocharged Perkins' TIER3 "aspirated 4-cylinder, with a clean and modern design. Range is between 74, 83, 92.5 and 102 hp (ISO)



These engines are equipped with an advanced fuel injection, which optimizes the air-fuel mixture, thereby improving combustion and engine efficiency, so we have more horsepower and more torque with lower operating costs.

Perkins engine is quiet, low emissions and strong torque.
Modular transmission is equipped with a clutch and reverse control and is available in two versions:

• Mechanical (SPEED FOUR)
• Electro (POWER FOUR).

POWER SHUTTLE transmission includes a hydraulic reversing edge and a hydraulic splitter (POWER FOUR + 20% increased).

Hydraulic pump offers a total capacity of 82 l / min. Three point system provides a lifting capacity of 3,750 kg. The system has up to four valves, two joystick-controlled loaders and two controlled by levers located near the driver's seat.

Landini family style bonnet line store and visibility all around the cabin offered side doors, full glass rear pillar attached, provides a very good peripheral vision, handling and driving pleasure.

Performance are enhanced comfort tractor cab with controls logically-arranged and air conditioning system installed in the cabin ceiling. Height adjustable seat and arched profile of the bonnet ensures perfect visibility during handling. The instrument panel features analog tools that allow quick and easy reading of information.

The series includes four versions of tractors equipped with different engine designs hinged hood allows easy access to the engine for maintenance and routine service and can choose between five types of transmission, two cab styles for maximum versatility, a comfort and increased productivity.

Two different cabins heading muffler, which is located on the right side of the cab pillar to version Top Comfort and above the hood and suspension comfort version to version Top Comfort.

Sarek National Park is one of the most spectacular mountain attractions in Scandinavia. Along with several other European reserve was established among the first in Europe in the first decade of the twentieth century.

Here in northern Sweden over an area of ​​2000 square kilometers, natural phenomena follow their unhindered by human presence, the same cycles for millions of years. Sarek National Park includes six mountain peaks above 2000 m, 13 each exist in Sweden. The highest Sarektjakka called, and reaches 2089 m

Would have to mention the presence of about 100 glaciers formed during the last ice age, which although not meet all international standards, they are still unique in the country.

Unlike other provinces in the region that lies, lakes or wetlands reserve have some quite large, which ensures sharp biodiversity. So far identified 380 species of vascular plants, 182 species of vertebrates, 24 species of mammals, 142 species of birds, and several species of reptiles, amphibians and fish.

Of these some plants and animals, especially large carnivores (wolf, lynx) are on the list of endangered species in Sweden. The greatest diversity of birds are found in the delta area and around Lake Parekjaure Laitaure.




Residents only "permanent" of the park are people belonging to indigenous peoples, the Sami. To enable them to survive and not forced to leave their native places, restrictions in the park from them were and are minimal. Not the same is true for foreigners, all activities are able to affect animals (hunting, fishing, etc.) is strictly prohibited.

When arriving at the park, many expectations were not consistent with reality. He proceeds to mountain peaks in Sarek National Park became - as signals even administrators objective - a must do for tourists as stain. Certainly, however, very few receive training and equipment necessary to direct clashes with wilderness.

Sarek National Park're alone. Marked routes and any accommodation possibilities missing and there are only two bridges in the whole park. If you dare to visit yet, it's good to know that there is an hour, an hour and a half from the town Jokkmokk, depending on the route taken.

Considered "piece de resistance" of the French manufacturer of machines and sprayer Berthoud, Berthoud Trailed machine Tracker is the tank capacity of 3200 liters



The production machinery sprayer Berthoud Tracker, reliability is the key word being considered very precise in execution. These qualities, combined with the convenience of ordering from the tractor cab desktop wallpaper, make us understand what is the most popular machine sprayer in its category.

Flowing lines, rounded shapes, equipment performance, these are distinctive signs Berthoud, Berthoud based on patents: ACTIFLEX suspension stability AXIAL ramp and pump Berthoud.

The Tracker is 3200 liter tank of 24 m SEH Axial ramp with DPTronic control. Diaphragm pump is equipped with Comet BP 280 (280 l / min. - 20 bar), have Actiflex suspension, patented by Berthoud, Berlogea controlled.

Axial ramp is known of steel (point suspension spring) lift and hydraulic locking divided into 7 sections, correction angle and solenoid actuators with regularization DPTronic (Berthoud, the valve pressure sensor).

Also spray adjustment can be provided and DPA pump system Volux the capacity of 240 l / min. or optional 320 l / min. Ramps can be kind RLD between 18 and 24 m and Axial, between 24 and 33 m
DP TRONIC pressure sensor, a second generation stream onto the ramp adjusts according to speed and pressure gradients.

Advantages: High precision (measurements made closer to the nozzle), dosage and minimum pressure permanently secured, each nozzle can be closed without changing settings erbicidării control and ramp functions, adjust volume / ha permanent visualization of four parameters: volume / ha, speed, amount of herbicide applied pressure measurement, can store data from 10 plots.

• Advantages pressure sensor: high precision, no jams, no need for calibration return, each nozzle can be closed without changing settings.
• DP Tronic Advantages: Instant starting pressure, minimum pressure provided during spraying, allow dosage adjustment during application, low maintenance. Advantages monitor DP Tronic: enforcement and ramp functions, adjust volume / ha, permanent displays the 4 main parameters splash.

Mechanical adjustments are of the same quality level with electronic adjustments controlled by a computer. Tracker Berthoud sprayer is made of welded steel chassis coated with corrosion resistant paint and the main tank is polyethylene and successfully cope with moderate mechanical action. No problems with clogging and clogging filters because detaching fiber glass yarn tank walls.

Control valves are placed on the control panel Berlogea that besides the pooling together the main controls, ensures the protection, ie a good seal, not allowing penetration of herbicide vapors or dust, with only two levers to operate 16 functions.
Another technical innovation used the sprayer Berthoud Tracker is the bridge

ACTIFLEX the only truly independent suspension on the market, which allows a depreciation shock using mechanical springs.

Ramp AXIAL - pivot mounted near the center of gravity. Balance and alignment relative to the axis is achieved by a further spring mounted between the fixed and the mobile. Vibrations are reduced by 2 dampers. Axial ramp is a standalone device for reducing oscillation on each arm of the ramp, which presses horizontal acceleration and braking to reduce oscillations.