Forest Rebuilding

Forest rebuilding trees tractors agriculture and plants


Although there are many  harvesters on the market, many of them being a serious competitor in the company's offer Mewi is almost natural for a farmer to turn their attention to the Fendt products. This is because, in addition to well known tractors, German manufacturer offers a wide range of combine harvester, which meet the most demanding and different requirements of farmers. Numerous tests and tests carried out before launching any of Fendt products left their mark on these reliable fully combine. Series E, which includes four models, is specially designed for the needs of farmers in farming environments. Due to reliability and robustness, combines Fendt E-series ensures maximum cost efficiency, an investment that pays off quickly.
The new Fendt combines 5220's, with SCR technology
Combining 5220's, equipped with a powerful and efficient AGCO SISU Power, an output of 209 hp and environmental considerations and fuel savings, Fendt combines benefits of SCR technology (Selective Catalytic Reduction). The technology used for harm reduction, a solution of urea in water known as AdBlue, which is injected into the flue system. SCR system offers significant advantages by increasing torque to Tier 3 engines, and fuel consumption is reduced by 10 to 16%.
Also, combined with spacious cabin has a high visibility, controls are grouped on the right side of the controller to be handled ergonomic and intuitive control and monitor, Agritronic Plus, displays information on all operational parameters of the machine.
Because performance is as good, combine has about 6,500 liter hopper and a discharge flow of 85 liters / second, ensuring his discharge in about 80 seconds. For as good striking, combines Fendt 5220 E has a threshing and separating two drums packed with 600 m diameter and a width of 1340 mm, with a number of bars 8, concave, with an area of 0.83 m2 and a winding angle of 106 degrees, ensuring a more aggressive friction material between the table and barbecue, to extract seeds. Ventilation system cleaning Sieves High Capacity (HC Sieves), with a total area of ​​6.72 square meters, ensures good cleaning even in difficult cultures.
Maximum productivity Fendt E-series
Agronomist George Constantin is a company in the city administrator Dăeni, Tulcea. Unit headed by George Constantine subcontract agricultural machinery to farmers in the area. Once acquired, in 2010, a new tractor Fendt 310, has added to its fleet in 2011, combines Fendt 5220 E. "I am very happy choice, because I wanted a really combines reliable, which have good clean and very easy to adjust, given that reach customers with different types of cultures. The batter is very good even in cloudy weather, high humidity, while the combine cleaning system Fendt 5220 is made that the percentage of foreign bodies is very small, without any losses of customers' , shows George Constantine.
In addition to service provided by Mewi performance, is what other benefits come with the purchase of a combine Fendt E-series:
Innovative threshing, separating large surface area;
Uniform flow of material collected;
ABC mode to improve uniformity of flow separation and to horses for driving;
Strong driving routes, but also "gentle" the shaking;
Site easily adjustable for maximum cleaning efficiency;
Comfortable cabin with modern control elements;
Long lifetime of repairs. Relevant parts are galvanized;
FreeFlow header for maximum productivity.


Austrian company Steyr-CNH group ranks top among major competitors on the market agricultural tractors, forestry and utilities. Reputation and business reputation are well known Western market by quality and technical innovations thoroughly tested before launching new products.

The new range of tractors STEYR 9000 Multi Trac, multifunctional - with versions for field crops farms and farms producing variants of green fodder - the three models MT 9085 (63.5 kW/86 hp), 9095 MT (68.5 KW/93CP) and 9105MT (74.5 KW/102CP) transmissions are equipped with "semi power shift" and reverse "power shuttle". These tractors very modern design and comfort, ensuring excellent visibility and maneuverability.

Engines fitted to these tractors type turbo and intercooler, 4-cylinder, 4397 cc displacement, rated speed 2300 r / min, with a low fuel consumption (225g/KWh), the oil drain interval increased to 500 hours operation and Tier III emissions standard. Engine cooling is achieved with 2 circuits and has maximum efficiency even in extreme weather conditions. Eco-type fan with fan blades can change angle ensures maximum cooling efficiency thus reducing fuel consumption. By changing the rotation direction, automatically cleans the air flow cooling radiator. Monitoring system provides automatic shutdown its engine in case of serious accidents (eg overheating).

Wet type multi-plate clutch is allowing shifting without pressing the clutch pedal.
The transmission is driven by leverage Multicontroler power & power shift shuttle with multiple wet disc type couplings ("wet multiple disc") controlled electro-hydraulic. Thus, to obtain 16 speeds forward and 8 back, and maximum travel speed is 40 km / h Anointing of the transmission gear is provided with oil pressure. Differential lock is done by electro-hydraulically. Is front engine, front differential lock.
Water system is open center type (fixed flow) with pressure balancing valves, gear pumps, dual flow model 50 50 l / min or triple the rate 50 35 50 l / min and 175 bar pressure .

Order hydraulics can be done with EHR or ELR (electrohydraulic control system). Maximum lifting capacity is 4900 kg and can be mounted up to 5 outlets for operating hydraulic cylinders single or double acting.
Rear PTO provides four ranges of speed: 430, 540 750 and 1000 r / min. PTO training is electro or mechanically (with soft start), and PTO shaft is 1 3/8 "with 6 grooves.
Service brake is wet type multi (4 pcs), hydraulic self-adjusting. Optionally, tractors can be equipped with air brake system. And front wheel brakes are wet type (2 pcs.), Also operated hydraulically.

The cabin is heated (3-speed fan) and air conditioning (optional cab roof mounted), installation of lights with up to 10 lights integrated into the body and cabin doors and wide-opening side windows, roof ceiling, exterior mirrors handlers ( optional electric adjustment and heating), adjustable steering column, standard & deluxe seat, low noise (76 dBA) and Standard & deluxe passenger seat.
Latest technologies, finishing, technical performance and low fuel consumption of tractors STEYR series 9000MT make these models  particularly attractive


Model: 700C series
Booth: advanced management center tractor
At the TMC control system stays new display, which is now compatible with ISOBUS and eliminates the need to introduce in the cabin of accessory equipment control boxes. Thus, the operator must learn not only one procedure. all tractor functions are monitored, controlled and configured from a single screen.

New levels of cab comfort
Both seats optional guarantees comfort over endless workdays. The standard version is a seat adjustment with 10 positions, with passive air suspension, lumbar support, backrest cushions carepot be changed and ergonomic comfort seat to rotate. Seat vibration reduction system (Vibration Reduction System - VRS) is an electromagnetic system controlled by a computer that adapts to driving conditions.

Power management
Teams automatically controls engine speed and transmission to ensure optimum power and fuel economy. The operator can also select two preset engine speeds, providing a constant speed for work or other maneuvers such as turns.

Middle wheels and shields
For extreme working conditions, was extended the life of tracks to work on rocks, sand or abrasive conditions with extremely hot climates. Polyurethane wheels means ultra-wear resistant and resistant to damage raschetare. Increased protection is guaranteed and the new shield that covers the entire length - made all UHMW polyurethane - which prevents penetration stones in the middle wheels.

Increased flexibility of the hydraulic system

The hydraulic system allows the operator to select a new function which can be more important than others and preserve resources for that function, to the detriment of other functions. Larger machines accessories that require stronger hydraulics, are easily managed due to a larger pump optional - 223 l / min - both MT 700C Series, and Series MT800C


MT800C Series track tractors with rubber for special applications are very versatile, ideal for earthworks.


Rate it exceptional fuel efficiency and reliability make them incredibly cost-effective to use and offers excellent investment recovery, while setting new standards in comfort and operator control.



Model             Engine                                                   Rated                              Max Power  
MT845C    CAT® C15 ACERT™                                      430                                     473        
MT855C    CAT® C15 ACERT™                                      460                                     506        
MT865C    CAT® C18 ACERT™                                      510                                     583
MT875C    CAT® C18 ACERT™                                      570                                     609        





800C series tracked tractors
Model: 800C Series
Booth: advanced management center tractor
At the TMC control system stays new display, which is now compatible with ISOBUS and eliminates the need to introduce in the cabin of accessory equipment control boxes. Thus, the operator must learn not only one procedure. all tractor functions are monitored, controlled and configured from a single screen.

New levels of cab comfort
Both seats optional guarantees comfort over endless workdays. The standard version is a seat adjustment with 10 positions, with passive air suspension, lumbar support, backrest cushions carepot be changed and ergonomic comfort seat to rotate. Seat vibration reduction system (Vibration Reduction System - VRS) is an electromagnetic system controlled by a computer that adapts to driving conditions.


Power management
Teams automatically controls engine speed and transmission to ensure optimum power and fuel economy. The operator can also select two preset engine speeds, providing a constant speed for work or other maneuvers such as turns.

Middle wheels and shields
For extreme working conditions, was extended the life of tracks to work on rocks, sand or abrasive conditions with extremely hot climates. Polyurethane wheels means ultra-wear resistant and resistant to damage raschetare. Increased protection is guaranteed and the new shield that covers the entire length - made all UHMW polyurethane - which prevents penetration stones in the middle wheels.


Increased flexibility of the hydraulic system
The hydraulic system allows the operator to select a new function which can be more important than others and preserve resources for that function, to the detriment of other functions. Larger machines accessories that require stronger hydraulics, are easily managed due to a larger pump optional - 223 l / min - both MT 700C Series, and Series MT800C


In the last two years, Case has invested in upgrading low power tractors and the high power, coming up with clever solutions, automated, computerized, precision agriculture and environmental protection Of tractors that have confirmed for both worldwide and in Romania include:  

 STEIGER and Quadtrac

 New generation Steiger tractors Quadtrac and includes six models with engine power at peak loads ranging between 391 and 670 hp. The range is constructed using two types of design of housing, a housing narrow tractors 350-450 hp and 500-600 hp models wide cabinet. Steiger new models of 350, 400 and 450 hp, has a housing capacity ideal for power, providing power-- optimum horsepower and a structure that fits all cereal crops. Wider housing Steiger tractors, models 500, 550 and 600, provides new levels of productivity in industry, integrating new transmission shaft system work harder to transmission components. New Quadtrac and Steiger tractor models are adapted to the new EU legislation on emissions effective 2011. EfficientPower equipped with new technology, they have lower fuel consumption and performance. Peak horsepower at CASE IH reached 670 hp models Quadtrac and Steiger 600, making this firm to conquer new heights in industry history in the field. Nine Quadtrac range includes four models, the engine power under peak loads ranging from 502 to 690 hp. Case IH Quadtrac configuration that uses a positive drive system, independent, four-track, reducing ground pressure and provides more traction for hard work, with minimum damage to soil.  


 MAGNUM

 The new range of tractors offers five models from 235 Magnum with a 274 hp engine and ending up with the latest model of this series, Magnum 340, which has 389 hp maximum is equipped with Power Management. The new Magnum models 235, 260, 290, 315 and 340 are equipped with a 8.7 liter engine used in recent years to combine Case Axial Flow 7120. These engines offer impressive power growth, with business customers are already used Case IH Magnum, shooting in difficult conditions, being enhanced with the new "Power Management". Power Management offers over 35 additional horsepower, available for transport, PTO and hydraulic requirements. Case IH Magnum tractors are equipped according to a new technological concept EfficientPower. To meet new emission standards Tier 4A in 2011, the new Case IH Magnum tractors are equipped with SCR technology (Selective Catalytic Reduction), which leads to maximum performance at the lowest possible operating cost. This exhaust gas cleaning was developed in collaboration with Fiat Power Train Technologies (FPT).

 PUMA CVX

 Puma CVX models, with power ranging between 131 and 160 hp were equipped with the technology first EfficientPower (lower fuel consumption - higher performance). Due to huge worldwide success of PUMA CVX, CASE has now extended this series of tractors with three new models: Puma 130 CVX, with power of 131 hp (171 hp maximum power and power management), Puma CVX 145 which has 146 hp (power maximum 188 horsepower, with Power Management) and Puma CVX 160 is rated at 160 hp (203 hp maximum power, Power Management). The appearance of Puma CVX tractors new series reflects a compact design. The rear of the bonnet is now much smaller. As a result, visibility of working area in front of the tractor is much improved. The cabin is ergonomic model "Surround Vision" and provides a stress-free operation throughout the working day, with a noise level of 69 dB (A). Compared with larger models Puma CVX series, smaller wheelbase provides a much better maneuverability and a turning radius smaller. The engine is 6.7 liter, 6 cylinder, common rail (common rail) turbodiesel, an engine equipped with standard power management. This technology provides more power, up to 30 horsepower depending on conditions. Puma CVX models provide the most advanced power management system currently available for this class.  

Farmall U

 Case tractors farmall U Series was completely redesigned for use as tractor with panoramic views and a field survey in slope. In addition to new designs, new series features a farmall latest technology engine, tractor heart is a completely new engine, with an innovative exhaust gas recirculation (EGR). There are three models, with powers of 90, 100 and 110 hp. The new series of tractors farmall U "Efficient Power" provides a power increase in all areas, including the PTO and hydraulic systems and is equipped with a host of new features. The new series farmall tractors are powered by engines made by latest technology, with engine capacity of 3.4 liter common-rail system, with turbocharger and intercooler system with a cooled exhaust gas recirculation EGR external . In addition to the external drive used EGR diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF). U farmall tractors meet new standards 4B/Tier final stage 4 of the EU. A wide choice of transmissions is available for U EP farmall tractors, depending on their application requirements. These include an additional unit Power Shuttler standard or optional 12x12 24x24 Shuttler Power system with conditioning in two stages. You can opt for an additional unit Power transmission Shuttler 20x20, with option to speed ramp.


Willow is a tree with branches that extend over increases especially in wetlands, along rivers and lakes and is extremely weather resistant. If you want to shade and cool throughout the summer, do not hesitate and plant a willow tree in your garden.


Weeping willow was so named because its branches sometimes hanging to the ground, under the weight of branches and leaves abdunentei.

Willow branches, holy celebration in the church of Palm, making up for centuries of Christian tradition.

Willow is part of the family Salicaceae, the arbursti deciduous and elastic branches that grow to 20 meters high and is called wicker. At this time we know of over 500 species of willow worldwide.

Willow leaves are elongated and have saber, grow to 10 cm long and have a silver color. They appear in late winter, giving the tree a very special picture. Willow leaves are green as they mature and turn yellow in autumn.

Willow flowers look like fluffy buds, which is also called Matisse.

Willow is a beautiful tree, which grows and develops rapidly, but the smaller branches and the leaves fall as fast.


How to grow a willow

Weeping willows are planted only in very wet locations, away from home or other structures, because their roots grow fast, long and thick, destroying any plant, building or pipe passing through their neighborhood. Because always looking for sources of water, they had encountered numerous willow roots that have identified and destroyed sewage systems, so we must consider this aspect when you decide to plant a willow. The ideal place is somewhere in the back garden, in an isolated place, which allows it to grow and is distinguished by its spectacular form.

New plants grow easily and get them to them, just need to cut twigs or branches from a willow old and planted them in a fertile land. It is essential to keep the soil moist around new branches planted in the early months of spring, the ideal time for planting.

Remember that willow water needs all year long.


How can you enjoy the willow

The best places for planting willow are open spaces, generous, near a lake or a fountain. Willow will you shelter and shade, recommending they be planted near a place to socialize in the garden, where you can set the table with benches or a gazebo.

Of willow can be drug because it contains salicin, acetylsalicylic acid in aspirin-like. Willow tea is sedative, treats insomnia and relieves pain uternine, but is used as an antirheumatic.

Willow wood is not good to burn, but is ideal for sticks of matches, and its branches are suitable for making elastic pimples and enclosures.




Tractors from Fendt 939 is equipped with SCR technology, integrated ABS and air pressure adjustment. Called "leader", the most powerful standard tractor market, with a maximum power of 390 hp and amazing performance, can ever compete for top position on the farm any farmer.

Fendt Vario tractors of series 900 are so designed as to provide as much, using as few resources as fuel, time or energy.
The new series consists of six models whose power is now starting at 240 hp (instead of 220, the previous), the Vario 924, rising in increments of 30 hp to 390 hp, Fendt 939 tractor fabulous.
A 6-cylinder Deutz engine with a displacement of 7.8 liters, 390 hp (ISO), a transport speed of 60 km / h, tires with a diameter of 2.15 m and a maximum weight of up to 18 tons - are all key elements that define the "flagship" of the series 900, Fendt 939 Vario.



Engine with the latest technology in agriculture
Marktoberdorf new vehicle can be recognized easily because Ad-Blue tank nearby supply of diesel fuel filler and due to the catalytic converter at the exhaust pipe. So to get out of the tailpipe, the exhaust gas are treated with urea solution and not recirculated through the chamber, the combustion process is not impaired, ensuring high efficiency engine power. The company has gained experience with SCR technology for NOx after-treatment, currently being built inside a 900 Fendt latest and modern technology in agriculture.
Cabin 900 series is equipped with trip computer Variotronic, surprisingly its attractive menu and uniform hierarchical structure, with touch screen. The order includes both the tractor and machine controls attached to the wheel guide, technical documentation and much more all in one device.




Whether used for agricultural, forestry or construction, Fendt Vario 900 has excellent qualifications and skills for any activity. To make even more, Fendt tractor is equipped factory with a leading "dual drive" (front / rear), which contains the same features as the riding. It is possible to perform a large variety of tasks, fully exploiting the tractor to get maximum efficiency.
Fendt 900 Vario has more than 22 connections, offering connectivity much more than any other tractor in a class of similar power, six plugs electro Double action back and two in front, the power socket, ISOBUS connection cable outlet and more. This attachment provides versatility and smooth work of all the equipment, providing real work "team" of the tractor and equipment.
900 series tractors work at maximum efficiency 365 days per year for the entire philosophy underlying efficiency Fendt, for long term success of its customers.

Better care for the environment
• 95% less NOx
• 95% fewer particles emitted;
• Reduced CO2 emissions by reducing fuel consumption;
• Use fewer working materials due to the incorporation of multiple functions;
• By using VarioGrip, reducing soil compaction.



Maximum profitability
• 17,500 liters of fuel saved with SCR (10,000 hours)
• The e-Efficient Technology facilitates savings
• Automatic performance tuning of engine work


• Using VarioGrip (tire pressure control system), it consumes 10% less fuel


Locust tree (Robinia pseudacacia) is grown in hilly areas and campie.Density per hectare, is 5000 trees, the planting distance of 2x1m recommended. After extracting seeds from pods (in November-January), they paste and then stored in bags. Germination is 70-90%. In one kilogram seeds are 49000-54000. For seeding, seeds are brewed with water at 75-95 * C and keep in hot water (50-60 grage C) another 10-12 hours, or scarify. Late spring seeding is practiced at a depth of 5-6 cm. Emergence takes place after 10 days, the percentage of 28-30%. Production cycle is 1 year, juveniles with a minimum diameter at the base of 6mm.


Methods of scarifying

Some seeds are so hard shell is impervious to water and gas. (Eg acacia, castor yellow). These seeds will not germinate until their skin is altered (modified) physical. Seed shell is necessary for seeds to germinate. In fact, many seeds have skin as physical barrier for the state of sleep to stop germination.
Any process of breakage, thinning, drilling, grinding or mechanically altered seed shell to make them permeable to water and gas is known as scarification. By altering the seed shell with this procedure is pemisa water absorption by them. In nature this process occurs due to exposure to freezing temperatures or microbial activities that change the properties of skin in winter.
Scarifying seeds occur by passage through the digestive tract of birds and animals.
Scarification methods are common: the mechanical action, hot water and exposure to acids.

A. Mechanical scarification. Involves breaking or weakening shell seeds and can be done with sandpaper or a file for skin abrasion., Using a knife to slash (crack) shell, or using a hammer to break the shell to allow water to enter. This operation is done carefully so as not to damage the embryo crush seeds. After scarification, seeds should be planted as soon as possible or cold, moist stratification made if necessary. This treatment works well for larger seeds. Smaller seeds can be rubbed between sheets of fine sandpaper. If the seeds are too small to see progress, a different method should be soaked in water.
Two. Scarification with hot water. Some shells of seeds can be soaked in warm or hot water (75-95 ° C but that nufiarba!) Seeds are left to soak in cool water for 12 to 24 hours before planting. Use of 10-20 times the volume of hot water to seeds. Seeds with a layer of wax should be washed several times in very hot water to remove wax before dipping the final.
Three. Acid scarification. Seeds are placed in a glass container (Do not use containers of any other material) and covered with concentrated sulfuric acid at about twice the volume of seeds. Seeds are easy to mix and allow to soak for 10 minutes to several hours depending on the hardness of the shell. When skin becomes thin, the seeds can be removed, cleaned and planted. This method involves the use of concentrated sulfuric acid, which is one of very dangerous chemicals that can be very dangerous for an inexperienced person and require very specific safety measures that should not be overlooked! It is important to remember never pour water into acid ! ALWAYS pour acid into water!



Why Paulownia?
Establishing a Paulownia tree plantations is one of the newest initiatives presented in the spirit of entrepreneurship among Romanians. Paulownia is a species of tree that grows tall with a beautiful wood, clean and free of knots.


It is essential to note that Paulownia wood is used to build light airplanes, the instruments of music, the yachts and the most sophisticated and expensive pieces of furniture. All these uses are the natural result of how the wood behaves when it is processed.


We must take into consideration that wood is a light, two times lighter than oak, very resistant to fire.
Have you seen how successful it is a trainer today?


Trainers are very valued, respected and looking for their advice! You learn how to become a successful trainer!


Find out how you can become authorized trainer!


Moreover, should emphasize the fact that stem directly regenerate, which means we do not replanted after being cut only after long periods of time.


Also, Paulownia trees and merit have to absorb large amounts of carbon dioxide and improve the quality of soil that develops.


For those who want to invest in these businesses, given the nature of the main reasons are the initial investment. Talking about a moderate initial investment quickly paid off.


Moreover, those interested in the business with Paulownia trees need to know and that is possible grant funding through European funds.


Last but not least, business with Paulownia trees major interest among many Romanians and because it is new. Any business that can come without fear of the existence of a high level of competition is one that deserves investment and the chance of profitability.


For those wishing to establish a Paulownia tree plantation there a guide available that provides all information necessary to start such a business. Guide provides all the steps to follow to establish a truly profitable Paulownia plantations.