Forest Rebuilding

Bellima KR model was developed from 125/130, which in the past has proved many times



Round baler baler press Bellima fixed camera can be operated by a small power tractor. With low maintenance costs, achieved very strong bales of hay and straw.

Like many other balers Krone round baler and Bellima is made with the new lift pick-up Easy-Flow. Previous model pick-up control cam and the other wearing parts have become unnecessary.

No cam technology has several obvious advantages. From experience so far, wear parts can be reduced by up to 60 percent. Overall, the new system EasyFlow is 30 percent faster than the old version controlled by cam.

Bellima can be ordered with two types of pick-ups. F125 Bellima width is 1.400 mm (DIN11220) with hydraulic control and can be set to desired height. The design reduced the distance between pick-up and chamber pressure, thus amplifying uniform transfer of material, optimizing power and maintaining uniform flow. EasyFlow version 1.800 mm extra wide base comes as Bellima model F130.

Bellima Fortima is not only in appearance but also by internal technical design. For example, working with the same technology lift bar - chain, which has already demonstrated its value. At this, due to the effect of driving with the gear, no power loss, turning the more intense. Suitable as a material for baling completely dry or wet.

A distinct advantage of Bellima is that no mail. Binding to both the purse strings and can be turned on hydraulic and conveniently from the tractor cab. Post and rope are placed in front of the media, where there is room for six coils of rope or two rolls of mesh.

The new generation JCB Fastrac aims to change the way agriculture is done. Customers need to achieve higher productivity and better performance, led to the development of new generation of JCB Fastrac tractors



Begin production in 1991 Fastrac tractor series 100, in 1995 the series 1100 with speeds up to 50 km / h, series 2000 series replaced in 1998 and 3000, in 2001 the entire range of tractors is equipped as standard with ABS; 2005 is the year Release Series tractors from 8000 to 8250 with an engine of 8.3 liter Cummins V-Tronic transmission, the 2006 engines from Cummins are present in 3200 and 3230 6.7 liter engine, 2155 and 2170 are launched in 2007, 2008 Series Release year 7000 - some of the best tractors on the market.

JCB Fastrac is the only tractor full suspension front / rear. Hence not only a comfort for operators and for equipment, but improved thrust without adding additional weight. Equal distribution of weight between the axles, reduce ground compaction and allows the development of the thrust.

Any vehicle capable of reaching speeds needs to be stopped in a safe maximum, is where JCB tractors, so all models are equipped with disc brakes. ABS offers unparalleled control in all conditions.

Fastrac 8250 features a color display with touch screen function, which gives the operator complete control of the tractor functions. Additional joystick buttons can be programmed via touch screen to meet user requirements. Touch screen allows selection of the operation according to the operation performed.



JCB Fastrac 8250 tractor performance

• torque of 1100 Nm at 65% of engine power gives huge tractor pulling power.

• full suspension system maximizes traction power, offering great stability.

• The bar offers maximum strength under all conditions.

• Distribute weight ratio of about 50/50 tires optimizes all four sides, reducing ground compaction and providing unmatched pulling power.

• The hydraulic pump has a flow up to 210 l / min and ensures optimal flow to enhance the performance of the equipment they work with.



Productivity

V-Tronic transmission provides optimal speed for each application. The joystick is programmable function groups to reduce operator fatigue to a minimum.

Control is easy and allows the operator to quickly obtain desired results, exploiting maximum tractor functions. 600 liters tank significantly increases the time between feeds for the tractor will not stay longer on the road than in the field.

Optionally, can be delivered with integrated front PTO operated by control panel for unparalleled precision.



Cabin

Color display with easy to understand icons, touch screen technology. Operator's seat is equipped with a cushion of air and can opt for heated seats. Console control arm chair offers comfort and a farmer. The cabin has panoramic views and a second passenger seat.

Optionally, the tractor cab can be equipped with heated windshield and mirrors in order to provide the best possible visibility, no matter how harsh the weather is working.



Maintenance costs

V-Tronic transmission automatically reduces engine speed to 1,800 rpm at 65 km / hour. Flexibility transmission reduces engine speed while speed remains constant. Oil pump oil pump only when needed, making power and fuel economy.

Intervals between revisions are 500 hours to 1000 hours engine and transmission, thus reducing maintenance costs.



INNOVATIONS

• only tractor in the world with full suspension front / rear;
• first tractor color touch screen;
• only tractor which can reach speeds up to 80 km / h, has continuously variable transmission (CVT) without speed: fuel consumption is reduced, allowing the engine to always operate efficiently;
• ABS braking system for maximum security is a necessity due to high speeds that can develop JCB Fastrac tractor.

Powerfarm new DT 100 was designed to comply with new pollution standards Tier 3 turbocharged Perkins' TIER3 "aspirated 4-cylinder, with a clean and modern design. Range is between 74, 83, 92.5 and 102 hp (ISO)



These engines are equipped with an advanced fuel injection, which optimizes the air-fuel mixture, thereby improving combustion and engine efficiency, so we have more horsepower and more torque with lower operating costs.

Perkins engine is quiet, low emissions and strong torque.
Modular transmission is equipped with a clutch and reverse control and is available in two versions:

• Mechanical (SPEED FOUR)
• Electro (POWER FOUR).

POWER SHUTTLE transmission includes a hydraulic reversing edge and a hydraulic splitter (POWER FOUR + 20% increased).

Hydraulic pump offers a total capacity of 82 l / min. Three point system provides a lifting capacity of 3,750 kg. The system has up to four valves, two joystick-controlled loaders and two controlled by levers located near the driver's seat.

Landini family style bonnet line store and visibility all around the cabin offered side doors, full glass rear pillar attached, provides a very good peripheral vision, handling and driving pleasure.

Performance are enhanced comfort tractor cab with controls logically-arranged and air conditioning system installed in the cabin ceiling. Height adjustable seat and arched profile of the bonnet ensures perfect visibility during handling. The instrument panel features analog tools that allow quick and easy reading of information.

The series includes four versions of tractors equipped with different engine designs hinged hood allows easy access to the engine for maintenance and routine service and can choose between five types of transmission, two cab styles for maximum versatility, a comfort and increased productivity.

Two different cabins heading muffler, which is located on the right side of the cab pillar to version Top Comfort and above the hood and suspension comfort version to version Top Comfort.

Considered "piece de resistance" of the French manufacturer of machines and sprayer Berthoud, Berthoud Trailed machine Tracker is the tank capacity of 3200 liters



The production machinery sprayer Berthoud Tracker, reliability is the key word being considered very precise in execution. These qualities, combined with the convenience of ordering from the tractor cab desktop wallpaper, make us understand what is the most popular machine sprayer in its category.

Flowing lines, rounded shapes, equipment performance, these are distinctive signs Berthoud, Berthoud based on patents: ACTIFLEX suspension stability AXIAL ramp and pump Berthoud.

The Tracker is 3200 liter tank of 24 m SEH Axial ramp with DPTronic control. Diaphragm pump is equipped with Comet BP 280 (280 l / min. - 20 bar), have Actiflex suspension, patented by Berthoud, Berlogea controlled.

Axial ramp is known of steel (point suspension spring) lift and hydraulic locking divided into 7 sections, correction angle and solenoid actuators with regularization DPTronic (Berthoud, the valve pressure sensor).

Also spray adjustment can be provided and DPA pump system Volux the capacity of 240 l / min. or optional 320 l / min. Ramps can be kind RLD between 18 and 24 m and Axial, between 24 and 33 m
DP TRONIC pressure sensor, a second generation stream onto the ramp adjusts according to speed and pressure gradients.

Advantages: High precision (measurements made closer to the nozzle), dosage and minimum pressure permanently secured, each nozzle can be closed without changing settings erbicidării control and ramp functions, adjust volume / ha permanent visualization of four parameters: volume / ha, speed, amount of herbicide applied pressure measurement, can store data from 10 plots.

• Advantages pressure sensor: high precision, no jams, no need for calibration return, each nozzle can be closed without changing settings.
• DP Tronic Advantages: Instant starting pressure, minimum pressure provided during spraying, allow dosage adjustment during application, low maintenance. Advantages monitor DP Tronic: enforcement and ramp functions, adjust volume / ha, permanent displays the 4 main parameters splash.

Mechanical adjustments are of the same quality level with electronic adjustments controlled by a computer. Tracker Berthoud sprayer is made of welded steel chassis coated with corrosion resistant paint and the main tank is polyethylene and successfully cope with moderate mechanical action. No problems with clogging and clogging filters because detaching fiber glass yarn tank walls.

Control valves are placed on the control panel Berlogea that besides the pooling together the main controls, ensures the protection, ie a good seal, not allowing penetration of herbicide vapors or dust, with only two levers to operate 16 functions.
Another technical innovation used the sprayer Berthoud Tracker is the bridge

ACTIFLEX the only truly independent suspension on the market, which allows a depreciation shock using mechanical springs.

Ramp AXIAL - pivot mounted near the center of gravity. Balance and alignment relative to the axis is achieved by a further spring mounted between the fixed and the mobile. Vibrations are reduced by 2 dampers. Axial ramp is a standalone device for reducing oscillation on each arm of the ramp, which presses horizontal acceleration and braking to reduce oscillations.

AP trailers intended for the transport of bulk products that are not sensitive to the three ways of tipping

These trailers are manufactured by the company AJG AGROGÉP. Are recommended in agriculture for grain transport, plant debris and sand transport, the gravel, earth, etc..

Tractors or machinery trailer towing these types of electrical installation should have 12 V brake system pneumatic and hydraulic pressure ensuring a minimum of 160 bar. All types of trailer AP are equipped with pneumatic brake, with the exception of the AP 250, which is mechanical tilting system, all other models have hydraulic tilting system.

Purchase, trailers are equipped with: blinds and uplifting, spare wheel, tilt.
Optionally can be mounted on them, even then, in the rear of the farm dump trailers, a discharge screw AVF, which is made all the AJG AGROGÉP. To operate this machine, the tractor must be equipped with hydraulic 160 bar and flow couplings whose transport is 30-35 l / min.

To obtain an adequate quality planting material, in terms of economic efficiency, both in terms of material for fruit growing sector and the planning for green or forest plantations, nurseries designed runs a series of crop maintenance


An important, in terms of consumption of labor, technologies working in nurseries have work to remove seedlings, transplanting it to or delivery to planting. In usual practice, removing seedlings can be "bare-root" or "root-soil bale".

Advantages seedlings with bale removal of soil from the root, using appropriate technical means, are undeniable:

- Extension of transplantation;
- Roots remain in good condition;
- Transplanting process is much easier shaft supported;
- Increasing the number of plants removed in an hour.

Explain technical equipment 500 (photo 1) is intended extracting dendro-horticultural seedlings, ornamental or fruit, medium-sized and large bale earth with the roots of nursery and / or plantation forestry for transplantation green areas, plantations and / or training of nursery fields.

Also, the machine can be used to dig holes where they are expected to undertake transplanting or planting material extracted bale earth or material with bare root (without bale).



Active enforcement operation is performed by its own hydraulic machine operated from the tractor unit.



Technical characteristics explain 500

The main technical characteristics of the equipment are:

• type of equipment: worn behind the tractor
• the aggregate tractor power: 45-65 hp
• Drive way: hydraulic, with its own installation
• number of active organs (dig): 3
• bale shape made: tapered
• Bale dimensions: diam. Top / diam. Lower / height: 500/320/500 mm
• bale lifting cylinder stroke: 1000 mm
• Maximum lifting height bale from the ground: 200 mm
• overall dimensions: length / width / height-mounted machine: 1675/1350/2850 mm machine weight: 700 kg

Work phases




Machine working process includes the following phases:

Phase I. In screeds (4) in the raised position, the sliding body (2) near the ground and dig support arms (3) remote machine by operating the tractor is positioned near the plant to be extracted, so that the three dig be at equal distance from the stem.

Phase II. Screeds approach by operating plant side cylinder (11) and descending order sliding body (2), while acting cylinder (10), until the tractor rests on supports screeds.

Phase III. Place screeds (4) in the soil by acting cylinders (9) successively from central hoe, making cutting roots and cut the side of the bale to the ground.

Phase IV. By actuating cylinder (10) to control sliding lifting body (2) with all the bits, so running above ground mining and lifting bale of earth with plants. Vertical root cutting and trimming the bottom of the earth is made by plucking.

Phase V. The removal side with roller bits (11) is released bale of land, which can be deposited on the ground in baskets for local handling and packaging and loading for transport.

Fitting (coupling) on ​​(to) U 445 DT tractor equipment explains 500, to form the unit of work is done with relative ease for performing this operation is required two operators. Control devices will transmit hydraulic controls and working bodies or different subsets hydraulically operating properly.

The device has a working capacity of about 108 plants per shift, which depends largely on the ability to achieve Mecanizatorul positioning maneuvers plants working unit to be extracted. Operational reliability coefficient is 0.95 percent and fuel consumption to 100 plant extracts is about 35 liters.